Documents › 7c11837e88a09c07cbe3f7fad736d0455ae4f1ae:1-6

ATF Firearms & Ammunition Technology Division Technical Bulletin 20-01

POST board policyreference 2019-10-30 6 pages (file pages 1–6) original file
About this document
Layer
attachment: a document a meeting packet links to
Type as titled
technical bulletin (kind from doc_type)
File
7c11837e88a09c07cbe3f7fad736d0455ae4f1ae application/pdf
Cases
POST 2306324 · Luke Baxter Walden (filed under case)

About: Luke Baxter Walden (case)

Page 2 · file page 2 larger image
Image of page 2; its text is alongside
Text: OCR figure: some text describes an image

ATF Firearms & Ammunition Technology Division Bulletin 20-01

Solvent traps

Legitimate solvent traps are devices attached to the muzzle of a firearm barrel designed to catch or “trap” dirty cleaning solvent pushed through the barrel from the chamber end and out through the muzzle. Solvent traps are intended to prevent solvent from dripping, spraying, or spattering when pushed out the muzzle end of a firearm barrel. The front end-cap of a solvent trap must be solid and have no hole that will allow a projectile to pass-through (including “pilot” holes that can be widened to allow a projectile to pass-through or marks indicating the location to drill such a hole). Devices that have a hole in or indexing mark for a hole in the front end-cap are classified as a “firearm silencer” under the NFA.

Inline filters

In contrast to spin-on filters, IFFs have holes at both ends and are specifically designed to allow fluid to pass through; therefore, inline filters are not objectively suitable for use as solvent traps. Therefore, the only logical purpose for attaching an IFF to the muzzle of a firearm is for use as a firearm silencer.

As referenced in Bulletin 17-02, IFFs are designed to use filter elements or flow valves without center holes. This is a design characteristic IFFs share with some firearm silencers. For example, U.S. Patent 4,530,417 mentions creating a center hole through baffles or wipes installed in a firearm silencer using the first round fired through the device. FTCB personnel tested several commercially sourced IFFs and found that an unmodified IFF attached to the barrel of a firearm functions to reduce the report of a portable firearm utilizing this method and would therefore meet the definition of a “firearm silencer.”

Fuel dispensing system hoses and nozzles typically utilize 3/4” or 1” National Pipe Tapered (NPT) threads, but threaded firearm barrels are not compatible. Adapters are therefore needed to attach IFFs to firearms (see chart below). FTCB research found no fuel fittings of the same size and pitch as those commonly found on firearm barrels. NOTE: Multiple adapters may be needed between the barrel and IFF.

Accordingly, FTCB has determined that an inline fuel filter possessed with a firearm modified to accept it, or with an adaptor(s) designed to affix the filter to the muzzle of a firearm (multiple adapters may be required), demonstrates intent to use the inline fuel filter to silence, muffle, or diminish the report of a portable firearm; therefore, it is a “firearm silencer” as defined. Further, as discussed below, an inline fuel filter with an end-cap having threads of the same size and pitch of those commonly found on threaded firearm barrels is a “firearm silencer” as defined.

YouTube contains a plethora of videos demonstrating IFFs (attached to firearm barrels) being used as silencers. Additionally, there are numerous websites on the Internet marketing various parts and kits intended for use in IFFs. A simple Google search for “NAPA 4003” will return

13

Figure: the OCR model's description, not text on the pageSeal of the ATF Firearms & Ammunition Technology Division

ATF Firearms & Ammunition Technology Division
Technical Bulletin 20-01

Page 2 of 6

Oct. 30, 2019

UNCLASSIFIED/LAW ENFORCEMENT SENSITIVE

Keys: ← → or j k turn pages; / finds.